Heatless Air Dryer, Air Dryers, Heatless Desiccant Air Dryers, Mumbai | India
HOME ABOUT US PRODUCTS GALLERY CONTACT US ENQUIRY SITEMAP

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
Products Range
Air Receiver
Heatless Air Dryer
Compressed air / gas dryers
After Cooler
Duplex Filters
 

Heatless Air Dryer

 
Heatless Air Dryer Heatless Air Dryer
 
PNEUM SYSTEMS INC, has developed Heatless Air Dryer which is a chemical desiccant using dryer, working on adsorption principle. The system consists of twin towers filled with desiccant of appropriate quality and quantity. Wet compressed air after being filtered by the prefilter and coalescing oil filter enters the distribution valve. An electrically operated valve with built in passages, which directs the air to one tower. The air is then passed through the tower and comes out in dry condition. The air is then passed through after filter to remove any carry over dust, via non-return valve. There is a by-pass arrangement with an orifice, to allow a fraction of dry compressed air to expand and pass through the other tower, here by regenerating it and making it ready for adsorption Cycle. The Regenerating air is passed out to the Atmosphere via muffler. At a preset time, the sequence control timer actuates the Distributor valve to reverse the tower function . For lower capacities, the distribution valve and control valve are integral units, however for higher capacity these control elements comprise of discrete control valves and orifices. Our Heatless air dryers are compact, economical, pre assembled, fully automatic, “Fit and Forget” type of units with very little power consumption of around 100 watts. For detailed offer, please indicate capacity, pressure, and source of compressed air.
 

Features of our Heatless air dryers :
1. Outlet air dew point - 40°C is achieved.
2. Controlled effluent gas temperature
3. Since the drier size depends only on flow and pressure, inlet temp. of 10ºC to 50ºC can be handled by same unit.
4. Very low spare parts inventory.
5. Desiccant beds can remove oil in its vapour form.

 
 
 
Address - Hotel Rajdarbar Lane, Chimat Pada, Marol Naka, Andheri (E), Mumbai - 400059, Mumbai, Maharashtra, INDIA.
Tele. No. - (022) 28506869 / 64144759      Fax No. - (022) 28506869
Website - www.pneumsystems.com
Home - About Us - Products - Gallery - Contact Us - Enquiry - Sitemap Designed & Hosted by : MID   Promoted by : GID